FUNCTION OF MAIN COMPONENTS
| Item | Outline | ||
|---|---|---|---|
| Cruise Control Switch | Main Switch | Turns ON/ OFF the power to the cruise control system. | |
| MODE Switch | Switches the control mode, between the constant speed control mode and vehicle-to-vehicle distance mode. | ||
| CANCEL Switch | A cancel signal can be output to the ECM through the operation of this switch. | ||
| RES/+ Switch | The acceleration function and resumption of a preset speed can be performed by operating this switch. A signal is output to the ECM when this switch is operated. | ||
| SET/- Switch | The deceleration function and vehicle speed setting resume signals are output to the ECM due to operation of this switch. | ||
| Distance Control Switch | While the system is in the vehicle-to-vehicle distance control mode, the driver can operate the distance control switch to select the vehicle-to-vehicle distance in three stages: long, middle, and short. | ||
| Stop Light Switch | Detects the pressing of the brake pedal and transmits a signal to the ECM. | ||
| Combination Switch | Wiper Switch | Transmits wiper switch information to the distance control ECU. | |
| Laser Radar Sensor | Radiates laser rays forward, uses the reflected rays to detect the presence of a vehicle being driven ahead, the vehicle-to-vehicle distance, and the relative speed, and transmits this information to the distance control ECU. | ||
| Distance Control ECU | While the system is in the vehicle-to-vehicle distance control mode, the distance control ECU detects the vehicle being followed based on signals from the laser radar sensor. Then, the distance control ECU calculates the acceleration or deceleration rate required in order to attain the target vehicle-to-vehicle distance, and outputs a request signal to the ECM and or skid control ECU. | ||
| Combination Meter | Transmits the vehicle speed signal to the ECM. | ||
| CRUISE Main Indicator Light | ·
Illuminates when the main switch on the cruise control switch has been pressed to turn the system ON. ·
If the distance control ECU detects a malfunction, this light flashes to warn the driver. |
||
| Master Warning Light | Illuminates when there is a malfunction in the system. | ||
| Buzzer | If the ECM or distance control ECU detects automatic cancel or warning signals while the vehicle is operating under cruise control, this buzzer sounds to inform the driver. | ||
| Multi-information Display | During the dynamic laser cruise control, the multi-information display receives signals from distance control ECU, in order to display the system conditions. | ||
| Steering Angle Sensor | Detects the angle and direction of steering and transmitssignals to the skid control ECU and distance control ECU. | ||
| Yaw Rate and Deceleration Sensor | Detects the yaw rate of the vehicle and transmits signals to skid control ECU and distance control ECU. | ||