Interior Design
Pursuing comfort and functionality, the interior is designed for recreation and premium feel.
Instrument Panel
The instrument panel has been designed based on the shape of a cylinder, providing a powerful image.
The metallic-look hairline grain used on the surface from the meter cluster through the center cluster creates an advanced image.
| *a | Shape of Cylinder | - | - |
|
Hairline Grain | - | - |
A dark gray metallic decoration has been applied to the instrument panel.
A plated decoration has been applied to the front register knobs and shut damper knobs on the Limited and Platinum grades.
The meter ring on SR5 grade has been made the same as the meter rings on the Limited and Platinum grades, and satin chrome treatment has been applied to it.
| *1 | Meter Ring | *2 | Front Register Knob |
| *3 | Shut Damper Knob | - | - |
|
Dark gray metallic decoration |
|
Plated |
A dark gray metallic decoration has been applied to the power window switch base on the SR5 grades.
A dark gray metallic decoration has been applied to the console for the rear No. 1 seat.
|
Dark gray metallic or woodgrain decoration |
|
Dark gray metallic decoration |
The hydrographic wood-grain decoration of the steering wheel, shift knob and power window switch bases on Platinum grade models.
The cover skins of the front console box door and the console box door for the rear No. 1 seat on Platinum and Limited grade models.
| *1 | Steering Wheel | *2 | Shift Knob |
| *3 | Front Console Box Door | *4 | Console Box Door for Rear No. 1 Seat |
| *5 | Power Window Switch Base (Rear Power Window Regulator Switch Assembly) | *6 | Power Window Switch Base (Front Power Window Regulator Switch Assembly) |
Storage Space
Instrument Panel and Door Trim
A glove box has been provided in the lower section of the front passenger side.
An upper box has been provided in the upper section of the front passenger side.
A lidded coin holder is provided in the center cluster on the 2WD model.
A pocket is provided in the center cluster.
An armrest storage and a large size door pocket are provided in the door trim.
| *1 | Armrest Storage | *2 | Coin Holder (2WD) |
| *3 | Upper Box | *4 | Large Size Door Pocket |
| *5 | *6 | Glove Box |
A Light Emitting Diode (LED) illumination light and a shelf are provided in the glove box.
| *1 | Shelf | *2 | LED Illumination Light |
Front Console
A removable cup holder and a storage space under the cup holder are provided in the console. By removing the cup holder, this area can be used as a large-capacity storage space.
A small storage pocket is provided in the console.
A map holder with a map holder lid is provided in the console.
A card holder, a pen holder, a map holder, a travel tissue holder, and a map holder lid clip are provided on the inner side of the console box door.
A removable upper tray and lower tray are provided in the console box.
A removable ashtray is provided in the console.
A cup holder for the rear No. 1 seat is provided behind the console.
The console box door can be used as an armrest. It slides 100 mm (3.9 in.) forward to ensure comfort.
| *1 | Removable Cup Holder | *2 | |
| *3 | Map Holder | *4 | Map Holder Lid |
| *5 | Removable Ash Tray | *6 | Storage Space |
| *7 | Cup Holder | *8 | Console Box Door |
| *9 | Map Holder Lid Clip | *10 | Travel Tissue Holder |
| *11 | Pen Holder | *12 | Card Holder |
| *13 | Console Box | *14 | Removable Lower Tray |
| *15 | Removable Upper Tray | - | - |
| *1 | Front Console | *2 | Console Box Door |
| *a | 100 mm (3.9 in) | - | - |
Overhead Console
A pocket for storing glasses is standard equipment.
A console with 2 small storage pockets is standard equipment on the Limited grade and optional equipment on the SR5 grade.
A conversation mirror is provided in the overhead console to communicate with the rear seat occupants.
| *1 | Glasses Pocket | *2 | Small Storage Pocket |
| *3 | Conversation Mirror | - | - |
Console for Rear No. 1 Seat
A cup holder with a removable cup holder separator is provided in front of the console.
A small storage pocket is provided behind the cup holder.
A draw box that can store items such as CDs is provided in front of the console.
A separator is provided in the upper box to adjust for the size of the CDs or DVDs. When it is not being used, the separator can be stored on the inner side of the upper box door.
When the upper box is opened forward, the inner surface can be used as a tray.
The inside tray of the lower box uses a removable cup holder separator. Thus, it can be used as a movable tray with a cup holder.
| *1 | *2 | Removable Cup Holder Separator | |
| *3 | Cup Holder | *4 | Separator |
| *5 | Separator Clip | *6 | Upper Box |
| *7 | Draw Box | *8 | Inside Tray |
| *9 | Tray | *10 | Lower Box |
| *a | DVD | *b | CD |
Deck Side Trim
A cup holder is provided in the armrest.
A lidded armrest box is provided in the armrest.
A seat-side box that stores letter size objects is provided.
A pocket that can store a gallon-size bottle is provided behind the left deck side trim of the SR5 grade.
| *1 | Deck Side Trim (LH) | *2 | Armrest Box |
| *3 | Cup Holder | *4 | |
| *5 | Seat-side Box | - | - |
Luggage Space
A tool and jack storage space and a deck box are provided under the deck board.
| *1 | Deck Board | *2 | Tool and Jack |
| *3 | Deck Box | - | - |
Combination Meter
A 6-gauge or 7-gauge meter is provided in the combination meter.
An Optitron meter is standard equipment on the Limited and Platinum grades.
A multi-information display is located in the speedometer.
| *A | 6-gauge Meter | *B | 7-gauge Optitron Meter |
| *1 | Multi-information Display | - | - |
Steering Wheel
A 4-spoke urethane steering wheel, 4-spoke leather steering wheel and a 4-spoke leather and wood steering wheel are provided.
An audio switch, a telephone switch, a voice recognition switch and a distance control switch are provided for the steering pad switches.
| *a | 4-spoke Urethane Steering Wheel | *b | 4-spoke Leather Steering Wheel |
| *c | 4-spoke Leather and Wood Steering Wheel | - | - |
Shift Lever
A urethane type shift knob is provided as standard equipment for the SR5 grade.
A leather type shift knob is provided as standard equipment for the Limited and Platinum grades.
| *a | Urethane Type | *b | Leather Type |
| *c | Material Ornament | *d | Silver Ornament |
| *e | Leather | - | - |
A woodgrain decoration has been applied to the shift knob on the Platinum grade.
|
Woodgrain Decoration | - | - |
Seat
A seat layout for 7 passengers is standard equipment on all models and for 8 passengers is optional equipment on the SR5 and Limited grades.
Fabric seat covers are standard equipment on the SR5 grade. Leather seat covers are standard equipment on the Limited grade and optional equipment on the SR5 grade. Perforated leather seat covers are standard equipment on the Platinum grade.
The vinyl leather is used for the rear No. 2 seat cover material for models with leather seat covers.
|
Vinyl Leather | - | - |
Front Seat
A manual 8-way, power 8-way, or power 10-way driver seat is available. A manual 4-way or power 4-way front passenger seat is available.
A lumbar support, a memory function, a seat heater, and a heated and ventilated seat system are provided.
A seatback pocket is provided on the driver seat and front passenger seat.
A seatback table is optional equipment on the front passenger seat of the SR5 grade.
| Item | Driver Seat | Front Passenger Seat | |
|---|---|---|---|
| Seat Slide | 240 mm (9.4 in.) | 240 mm (9.4 in.) | |
| Seat Reclining | Manual | 52° | 52° |
| Power | 50° | 50° | |
| Vertical Lifter | 50 mm (2.0 in.) | - | |
| Front Vertical | 30 mm (1.2 in.) | - | |
| *a | Manual 8-way Seat | *b | Power 10-way Seat |
| *a | Seatback Pocket | *b | Seatback Table |
Rear No. 1 Seat
Separate seats are provided on the 7-passenger models, and a 40/20/40 split type seat is provided on the 8-passenger models.
7-passenger Model
Separate seats with a tilt-down function are standard equipment.
The seat slide movement is 150 mm (5.9 in.) and the seat reclining angle is 26°.
An armrest is standard equipment on the SR5 grade and Limited grade. A console with an armrest between the seats is standard equipment on the Platinum grade.
When the seat is tilted down, the upper box of the console can be opened forward to make the top surface flat. This provides a space for loading flat objects, such as boards.
A seat heater is standard equipment on the Platinum grade.
A walk-in mechanism is provided in the outer seats for ease of in-and-out access.
| *a | Separate Seats with Armrest | *b | Separate Seats with Console |
| *1 | Tilt Lever | - | - |
| *a | Tilt-down | - | - |
| *1 | Upper Box | - | - |
| *a | Console | *b | Walk-in Mechanism |
8-passenger Model
A 40/20/40 split type seat with a tilt-down function is available as optional equipment for the SR5 and Limited grades.
The seat slide movement of the outer seats is 150 mm (5.9 in.) and the seat reclining angle is 26°. The seat slide movement of the center seat is 225 mm (8.9 in.) and the seat reclining angle is 34°.
A child care position, which slides 225 mm (8.9 in.) forward, is provided in the center seat.
An armrest is provided in the seatback for the center seat.
A walk-in mechanism is provided in the outer seats for ease of in-and-out access.
| *a | 40/20/40 Split Type Seat | *b | Armrest |
| *1 | Child Seat | *2 | Center Seat |
| *a | Tilt-down | *b | Child Care Position |
Rear No. 2 Seat
A 60/40 split type seat with a tilt-down function is provided.
A manual type seat is standard equipment on the SR5 grade. A power type seat is standard equipment on the Limited and Platinum grades.
A reclining handle is provided behind the seatback of the manual type seat. This handle can be used to pull up the seat which has been folded.
A fold seat switch and a reclining switch are provided in front of the deck side trim on the left and right sides of the power type seat. Also, a fold seat switch is provided behind the left deck side trim. It enables the seat to be operated from the back door side.
The seat reclining angle is 28°.
| *1 | Rear No. 2 Seat | *2 | Fold Seat Switch |
| *3 | Reclining Switch | *4 | Reclining Handle (Manual Type Seat) |
| *5 | Tilt and Reclining Lever | - | - |
| *a | Tilt-down (Manual Type Seat) | - | - |
Seat Arrangement
| *a | Default | *b | Front Passenger Seat: Table |
| *c | Rear No. 1 Seat: One Side Tilt-down | *d | Rear No. 2 Seat: One Side Tilt-down |
| *e | Front Passenger Seat: Table Rear No. 1 Seat and Rear No. 2 Seat: Tilt-down | - | - |
| *a | Default | *b | Front Passenger Seat: Table |
| *c | Rear No. 1 Seat: One Side Tilt-down | *d | Rear No. 2 Seat: One Side Tilt-down |
| *e | Front Passenger Seat: Table Rear No. 1 Seat and Rear No. 2 Seat: Tilt-down | - | - |