Aerodynamics
Large spats are adopted in front of the front tires to improve the flow of air around the tires and enhance aerodynamic performance.
The fender liner surface is dented to prevent air resistance and enhance aerodynamic performance.
| *1 | Fender Liner | *2 | Spat |
| *3 | Front Bumper | - | - |
| *a | A - A Cross Section | *b | Flat Surface |
| *c | Dent Surface | *d | Air Flow (Dent Surface) |
| *e | Air Flow (Flat Surface) | *f | Air Flow |
| *g | Front | - | - |
|
Floor Carpet Cross Section | - | - |
The fender liner lower surface is provided with a projection to prevent air resistance and enhance aerodynamic performance.
| *1 | Front Bumper | *2 | Spat |
| *a | Projection | - | - |
|
Air Flow | - | - |
Aero stabilizing fin was adopted on mirror base to generate vortex around the vehicle and pull in surrounding flow to be closer the vehicle. It contributes the improvement of steering stability.
| *1 | Aero Stabilizing Fin | *2 | Mirror Base |
| *a | Air Flow | *b | Vortex |
| *c | Aerodynamic effect of Aero Stabilizing Fin | - | - |