General
The following types of seat belts are provided.
| Seat Position | Seat Belt Type | Remarks | |
|---|---|---|---|
|
*1: Emergency Locking Retractor *2: Automatic Locking Retractor |
|||
| Front Seat | Driver | 3-point ELR*1 | Electrical Sensing Type Pretensioner, 2-step Force Limiter |
| Front Passenger | 3-point ELR*1 and ALR*2 | ||
| Rear No. 1 Seat | 3-point ELR*1 and ALR*2 | - | |
| Rear No. 2 Seat | 3-point ELR*1 and ALR*2 | - | |
Pretensioner and Force Limiter
In accordance with the ignition signal from the Airbag Sensor Assembly, the seat belt pretensioners activate simultaneously with the deployment of SRS airbags for a frontal collision. In the beginning of the collision if the tension of the seat belt applied to the occupant reaches a predetermined level, the force limiter activates to control the force.
| *a | Collision | *b | Impact |
| *c | Front Airbag Sensor | *d | Center Airbag Sensor Assembly |
| *e | Driver and Front Passenger Knee Airbag | *f | Driver and Front Passenger Airbag |
| *g | Seat Belt Pretensioners | - | - |
Shoulder Belt Anchor
A pillar-built-in adjustable shoulder belt anchor has been provided on the front seat belts and rear No. 1 outside seat belt to enhance safety and improve appearances.
| *1 | Adjustable Shoulder Belt Anchor | - | - |
| *a | Collision | *b | Impact |
A 3-point seat belt is provided for the rear No. 2 center seat and a belt retraction box is located in the roof, thus realizing an excellent appearance and the usability of the seat when the seat belt is not used.
A re-router is used for the center seat to secure comfort when a passenger wears the seatbelt.
| *1 | Re-router | - | - |
| *a | When Retracted | - | - |