Home › General › SPECIFICATIONS › 3UR-FBE FUEL
RM27L0U _V1 General _049291 SPECIFICATIONS _0235501 3UR-FBE FUEL F

SPECIFICATIONS  3UR-FBE FUEL  SERVICE DATA  


Fuel pressure
at idle Fuel flow when the fuel pressure switching valve is off 270 to 330 kPa
(2.75 to 3.37 kgf/cm2, 39.2 to 47.9 psi)
Fuel flow when the fuel pressure switching valve is on 370 to 430 kPa
(3.77 to 4.38 kgf/cm2, 53.7 to 62.4 psi)
remains for 5 minutes after engine has stopped 147 kPa
(1.5 kgf/cm2, 21 psi) or more

Fuel injector
Resistance: at 20°C (68°F) 11.6 to 12.4 Ω
Injection volume 97 to 118 cm3 (5.9 to 7.2 cu in.) per 15 seconds
Difference between each cylinder 21 cm3 (1.3 cu in.) or less
Fuel leakage 1 drop or less per 12 minutes

Fuel pressure switching valve
Tester Connection Condition Specified Condition
1 - Body ground Always 10 MΩ or higher
2 - Body ground
1 - 2 20°C (68°F) 5 to 10 Ω

Fuel pump
Tester Connection Condition Specified Condition
4 - 5 20°C (68°F) 0.2 to 3.0 Ω

Fuel sender gauge
Tester Connection Condition Specified Condition
2 - 4 Float level is F (upper) 111 to 119 Ω
Float level is E (lower) 506 to 514 Ω