Home › General › SPECIFICATIONS › 3UR-FBE INTAKE / EXHAUST
RM27L0U _V1 General _049291 SPECIFICATIONS _0235503 3UR-FBE INTAKE / EXHAUST F

SPECIFICATIONS  3UR-FBE INTAKE / EXHAUST  TORQUE SPECIFICATIONS  


Intake manifold
Part Tightened N*m kgf*cm ft.*lbf
Hose clamp x Air cleaner hose 4.0 41 35 in.*lbf
Purge VSV x Intake manifold 21 214 15
Throttle body x Intake manifold 10 102 7
Intake manifold x cylinder head 21 214 15
Vacuum switching valve (for ACIS) x Intake manifold 9.0 92 80 in.*lbf
Ventilation hose x Intake manifold Bolt A 21 214 15
Bolt B 10 102 7
No. 1 tube x Intake manifold 8.2 84 73 in.*lbf
No. 1 v-bank cover bracket x Intake manifold 10 102 7
V-bank cover bolt x Intake manifold 10 102 7
Wire harness clamp bracket x Intake manifold 8.0 82 71 in.*lbf

Exhaust manifold
Part Tightened N*m kgf*cm ft.*lbf
Exhaust manifold LH and RH x Cylinder head 21 214 15
No. 1 heat insulator x Exhaust manifold RH 10 102 7
No. 2 heat insulator x Exhaust manifold LH 10 102 7
Control valve shaft x No. 2 intermediate shaft assembly 35 357 26
No. 2 intermediate shaft assembly x Sliding yoke 35 357 26
No. 2 air tube x Exhaust manifold 10 102 7
No. 3 air tube x Exhaust manifold 10 102 7
Front No. 3 floor heat insulator x body 5.5 56 49 in.*lbf
Front No. 4 floor heat insulator x body 5.5 56 49 in.*lbf

Exhaust pipe
Part Tightened N*m kgf*cm ft.*lbf
Front exhaust pipe x Exhaust manifold RH 54 554 40
Front No. 2 exhaust pipe x Exhaust manifold LH 54 554 40
Front No. 3 exhaust pipe sub-assembly x Front No. 2 exhaust pipe sub-assembly 48 489 35
Center exhaust pipe x Front exhaust pipe and Front No. 3 exhaust pipe sub-assembly 48 489 35
Clamp 32 326 24
Monolithic converter protector x Monolithic converter 11 107 8
No. 1 monolithic converter protector x No. 1 Monolithic converter 11 107 8