Home › Engine / Hybrid System › 3UR-FBE ENGINE CONTROL › THROTTLE BODY
RM27L0U _51 Engine / Hybrid System _049293 3UR-FBE ENGINE CONTROL _0235518 THROTTLE BODY A

3UR-FBE ENGINE CONTROL  THROTTLE BODY  REMOVAL  


PROCEDURE

Hide 22030 4.REMOVE THROTTLE BODY ASSEMBLY

a.
A271499

Slide the clamp and disconnect the No. 4 water by-pass hose from the No. 3 water by-pass pipe.


b.

Slide the clamp and disconnect the No. 5 water by-pass hose from the water inlet housing.


c.

Disconnect the throttle body connector.


d.
A158613

Remove the 4 bolts, throttle body assembly and gasket.


e.

Slide the clamp and remove the No. 4 water by-pass hose from the throttle body assembly.


f.

Slide the clamp and remove the No. 5 water by-pass hose from the throttle body assembly.