Home › Engine / Hybrid System › 3UR-FBE ENGINE CONTROL › ACCELERATOR PEDAL
RM27L0U _51 Engine / Hybrid System _049293 3UR-FBE ENGINE CONTROL _0235520 ACCELERATOR PEDAL A

3UR-FBE ENGINE CONTROL  ACCELERATOR PEDAL  REMOVAL  


PROCEDURE

Hide 78110K 1.REMOVE ACCELERATOR PEDAL SENSOR ASSEMBLY

NOTICE:

This accelerator pedal does not require lubrication.

Do not apply oil or other lubrication to the accelerator pedal sensor assembly.

If applied, the accelerator pedal sensor assembly must be replaced.


a.
A153493

Disconnect the accelerator pedal sensor connector.


b.

Remove the 2 nuts and accelerator pedal sensor assembly.