Home › Engine / Hybrid System › 3UR-FBE ENGINE CONTROL › MASS AIR FLOW METER
RM27L0U _51 Engine / Hybrid System _049293 3UR-FBE ENGINE CONTROL _0235521 MASS AIR FLOW METER A

3UR-FBE ENGINE CONTROL  MASS AIR FLOW METER  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:

Perform "Inspection After Repairs" after replacing the mass air flow meter (See page Engine / Hybrid System>3UR-FBE ENGINE CONTROL>SFI SYSTEM>INITIALIZATION).


PROCEDURE

Hide 22204 1.INSTALL MASS AIR FLOW METER

a.
A158603

Install the MAF meter with the 2 screws.

Torque:
1.7 N*m (17 kgf*cm, 15 in.*lbf)

HINT:

Perform "Inspection After Repairs" after replacing the mass air flow meter (See page Engine / Hybrid System>3UR-FBE ENGINE CONTROL>SFI SYSTEM>INITIALIZATION).



b.

Connect the MAF connector.