Home › Engine / Hybrid System › 3UR-FBE ENGINE CONTROL › CAMSHAFT POSITION SENSOR
RM27L0U _51 Engine / Hybrid System _049293 3UR-FBE ENGINE CONTROL _0235522 CAMSHAFT POSITION SENSOR A

3UR-FBE ENGINE CONTROL  CAMSHAFT POSITION SENSOR  INSTALLATION  


PROCEDURE

Hide 11401G 1.INSTALL VVT SENSOR

A158607E04
1.86,0.139 2.758,0.338 0.899,0.199 12 for Bank 1: 0.054,0.139 0.938,0.338 0.884,0.199 12 for Bank 2:

a.

Install the 4 sensors with the 4 bolts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


b.

Connect the 4 sensor connectors.


Hide 11102A 2.INSTALL CAMSHAFT POSITION SENSOR

A158617

a.

Install the sensor with the bolt.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


b.

Connect the sensor connector.