Home › Engine / Hybrid System › 3UR-FE ENGINE CONTROL › THROTTLE BODY
RM27L0U _51 Engine / Hybrid System _049294 3UR-FE ENGINE CONTROL _0235533 THROTTLE BODY G

3UR-FE ENGINE CONTROL  THROTTLE BODY  INSPECTION  


PROCEDURE

Hide 22030 1.INSPECT THROTTLE W/MOTOR BODY ASSEMBLY

a.

Check the throttle valve.

i.

Check that the throttle valve opens and closes smoothly.


ii.

Check that there is no sludge accumulating around the throttle W/ motor body.



b.
A163107E01
0.113,2.353 2.605,2.717 2.492,0.364 10 Component without harness connected: (Throttle Body) 1.372,3.119 1.596,3.312 0.224,0.192 10 M+ 2.846,3.119 3.070,3.312 0.224,0.192 10 M- 2.447,3.804 2.766,3.216 2.766,3.216 2.827,3.216 false 2.041,3.804 1.722,3.216 1.722,3.216 1.641,3.216 false

Check the throttle control motor.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 (M-) - 2 (M+) 20°C (68°F) 0.3 to 100 Ω


If the result is not as specified, replace the throttle W/ motor body.