Home › Engine / Hybrid System › 3UR-FE ENGINE CONTROL › AIR FUEL RATIO SENSOR
RM27L0U _51 Engine / Hybrid System _049294 3UR-FE ENGINE CONTROL _0235541 AIR FUEL RATIO SENSOR G

3UR-FE ENGINE CONTROL  AIR FUEL RATIO SENSOR  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 89467B 1.INSPECT AIR FUEL RATIO SENSOR

A159233E07
2.508,1.201 3.117,1.611 0.608,0.409 10 HA1A*1 HA2A*2 0.587,1.339 0.882,1.538 0.295,0.199 10 +B 0.113,0.114 2.652,0.488 2.539,0.374 10 Component without harness connected: (Air Fuel Ratio Sensor) 1.988,1.998 2.438,1.426 false 1.447,2.009 0.862,1.461 false 0.163,2.555 1.069,2.739 0.905,0.184 10 *1: for Bank 1 0.163,2.985 1.069,3.169 0.905,0.184 10 *2: for Bank 2

a.

Disconnect the 2 sensor connectors.


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 (HA1A) - 2 (+B)
(for Bank 1)
20°C (68°F) 1.6 to 3.2 Ω
1 (HA2A) - 2 (+B)
(for Bank 2)



c.

Connect the 2 sensor connectors.