Home › Engine / Hybrid System › 3UR-FBE FUEL › FUEL SENDER GAUGE ASSEMBLY
RM27L0U _51 Engine / Hybrid System _049297 3UR-FBE FUEL _0235574 FUEL SENDER GAUGE ASSEMBLY G

3UR-FBE FUEL  FUEL SENDER GAUGE ASSEMBLY  INSPECTION  


PROCEDURE

Hide 83320 1.INSPECT FUEL SENDER GAUGE ASSEMBLY

A194630E01
1.332,0.989 1.497,1.164 0.165,0.174 10 F 1.65,2.568 1.815,2.743 0.165,0.174 10 E 1.943,1.067 1.466,1.067 false 1.61,2.655 1.402,2.655 1.402,2.655 1.126,3.121 false 2.779,0.916 2.618,0.916 2.618,0.916 2.429,1.299 false 2.781,1.156 2.614,1.156 2.614,1.156 2.501,1.301 false 2.809,0.826 2.938,1.010 0.128,0.184 10 2 2.813,1.063 2.926,1.232 0.114,0.169 10 4 0.065,0.043 2.568,0.477 2.503,0.434 10 Component without harness connected: (Fuel Sender Gauge)

a.

Check that the float moves smoothly between F and E.


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
2 - 4 Float level is F (upper) 111 to 119 Ω
Float level is E (lower) 506 to 514 Ω


If the result is not as specified, replace the fuel sender gauge assembly.