Home › Engine / Hybrid System › 3UR-FBE FUEL › FUEL PRESSURE SWITCHING VALVE
RM27L0U _51 Engine / Hybrid System _049297 3UR-FBE FUEL _0235576 FUEL PRESSURE SWITCHING VALVE A

3UR-FBE FUEL  FUEL PRESSURE SWITCHING VALVE  INSTALLATION  


PROCEDURE

Hide 1.INSTALL FUEL PRESSURE SWITCHING VALVE ASSEMBLY

a.
A380113E01
0.24,3.635 0.229,3.094 0.229,3.094 0.344,3.094 false 0.656,3.479 0.99,3.146 0.99,3.146 1.104,3.146 true 0.583,4.417 0.583,4.208 false 2.563,4.188 2.563,4.052 false 1.458,4.354 1.073,4.354 1.073,4.354 1.073,3.969 false 1.313,4.354 1.313,3.948 false 2.104,1.865 2.719,2.063 0.615,0.198 10 false Push 0.396,3.01 1.01,3.208 0.615,0.198 10 false Pipe 1.156,3.063 2.385,3.26 1.229,0.198 10 false Retainer 2.219,4.177 2.938,4.385 0.719,0.208 10 false Nylon Tube 0.24,4.417 0.958,4.625 0.719,0.208 10 false Connector 1.51,4.271 2.427,4.469 0.917,0.198 10 false O-Ring

Connect the 3 fuel tank main tubes and install the fuel pressure switching valve.

HINT:

Push the parts together firmly until a "click" sound is heard.


NOTICE:
·

Before connecting the tube connectors to the pipes, check if there is any damage or foreign matter in the connectors.


·

After the connection, check if the connectors and pipes are securely connected by trying to pull them apart.




b.

Attach the lock claws to the connector by pushing down on the cover, as shown in the illustration.


Hide 77266A 2.INSTALL NO. 1 FUEL TUBE PROTECTOR

a.
A194672

Install the No. 1 fuel tube protector with the nut.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)


Hide 77100 3.INSTALL FUEL TANK ASSEMBLY

a.