Home › Engine / Hybrid System › 3UR-FE FUEL › FUEL PUMP
RM27L0U _51 Engine / Hybrid System _049298 3UR-FE FUEL _0235582 FUEL PUMP A

3UR-FE FUEL  FUEL PUMP  DISASSEMBLY  


PROCEDURE

Hide 83320 1.REMOVE FUEL SENDER GAUGE

a.
A152226

Disconnect the fuel sender gauge connector.


b.
A152222E01
2.494,1.274 2.592,1.503 0.098,0.229 2.191,1.251 2.531,1.417 0.340,0.166 10 Slide 3.137,0.787 3.258,0.953 0.121,0.166 10 A

Press down on the sender gauge claw labeled A. Then slide the sender gauge upward to remove it.


Hide 2.REMOVE SUB TANK SUB-ASSEMBLY

a.
A152227

Disconnect the fuel pump connector.


b.
A152224

Using a small screwdriver, detach the claw on the end of the tube from the claw hole. Disconnect the tube from the 2 clamps.


c.
A152228

Disconnect the fuel tube.


d.
A152229

Using a screwdriver, detach the 3 claws from the claw holes.

HINT:

Tape the screwdriver tip before use.



e.
A152230

Using a screwdriver, detach the 2 claws from the claw holes and remove the sub tank sub-assembly.

NOTICE:

Do not damage the sub tank sub-assembly.


HINT:

Tape the screwdriver tip before use.



Hide 3.REMOVE FUEL PUMP

a.
A152231

Using a screwdriver, detach the 5 claws from the claw holes and disconnect the fuel pump from the suction plate with filter.

HINT:

Tape the screwdriver tip before use.



b.
A152232

Remove the fuel pump harness.


c.
A152233E01
0.455,1.52 0.956,1.691 0.501,0.171 10 Spacer 0.455,1.069 0.956,1.240 0.501,0.171 10 O-Ring 1.626,1.283 1.011,1.162 false 1.637,1.528 1.011,1.621 false

Remove the O-ring and spacer from the fuel pump.