Home › Engine / Hybrid System › 3UR-FE FUEL › FUEL SENDER GAUGE ASSEMBLY
RM27L0U _51 Engine / Hybrid System _049298 3UR-FE FUEL _0235584 FUEL SENDER GAUGE ASSEMBLY G

3UR-FE FUEL  FUEL SENDER GAUGE ASSEMBLY  INSPECTION  


PROCEDURE

Hide 83320 1.INSPECT FUEL SENDER GAUGE ASSEMBLY

A156397E01
0.294,0.275 2.800,0.684 2.506,0.409 10 Component without harness connected: (Fuel Sender Gauge) 0.538,4.223 0.696,4.405 0.158,0.181 10 E 0.538,2.434 0.696,2.615 0.158,0.181 10 F 1.421,2.52 0.695,2.52 false 1.182,4.301 0.691,4.301 false

a.

Check that the float moves smoothly between F and E.


b.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
2 - 3 Float level is F (upper) 12 to 18 Ω
Float level is E (lower) 405 to 415 Ω


If the value is not as specified, replace the fuel sender gauge assembly.