12204
1.INSTALL PCV VALVE SUB-ASSEMBLY
Apply a light coat of engine oil to the O-ring, and install it to the PCV valve sub-assembly.
When reusing the PCV valve sub-assembly, inspect the O-ring.
If the O-ring has scratches or cuts, replace the PCV valve sub-assembly.
Install the PCV valve sub-assembly to the separator case.
12261
2.INSTALL PCV VALVE HOSE
Install the PCV valve hose, and slide the clamp to secure the hose to the PCV valve sub-assembly.
11212
3.INSTALL NO. 2 CYLINDER HEAD COVER
17111
4.INSTALL INTAKE MANIFOLD