Home › Engine / Hybrid System › 3UR-FBE EMISSION CONTROL › CANISTER
RM27L0U _51 Engine / Hybrid System _049299 3UR-FBE EMISSION CONTROL _0235592 CANISTER A

3UR-FBE EMISSION CONTROL  CANISTER  INSTALLATION  


PROCEDURE

Hide 1.INSTALL CANISTER PUMP MODULE

a.
A263356

Engage the 2 claws to install a new canister pump module to the charcoal canister assembly.

NOTICE:
·

Do not allow foreign matter such as grease, oil or water to adhere to the O-rings.

·

Ensure that the claws are engaged properly.




Hide 77752 2.INSTALL CHARCOAL CANISTER SUPPORT BRACKET

a.

Attach the claw to install the charcoal canister support bracket.


Hide 77751 3.INSTALL CHARCOAL CANISTER BASE BRACKET

a.

Attach the claw to install the charcoal canister base bracket.


Hide 77754 4.INSTALL CHARCOAL CANISTER OUTLET HOSE

a.

Install the charcoal canister outlet hose to the charcoal canister assembly, and slide the clamp to secure the hose.


Hide 77754 5.INSTALL NO. 1 CHARCOAL CANISTER OUTLET HOSE

a.

Install the No. 1 charcoal canister outlet hose to the charcoal canister filter sub-assembly.


Hide 6.INSTALL CHARCOAL CANISTER FILTER SUB-ASSEMBLY

a.

Install the hose clamp to the charcoal canister assembly.


b.

Connect the charcoal canister outlet hose to hose clamp.


c.

Attach the claw to install the charcoal canister filter sub-assembly to the charcoal canister assembly.


d.

Connect the No. 2 canister outlet hose sub-assembly to the charcoal canister assembly.

NOTICE:
·

Check for damage or foreign objects on the connected part.

·

After connecting, check that the No. 2 canister outlet hose sub-assembly and the valve are securely connected by pulling on them.




Hide 77404 7.INSTALL FUEL TANK VENT HOSE SUB-ASSEMBLY

a.

Install the fuel tank vent hose sub-assembly to the charcoal canister assembly.

NOTICE:
·

Check for damage or foreign objects on the connected part.

·

After connecting, check that the fuel tank vent hose sub-assembly and the valve are securely connected by pulling on them.




Hide 77740 8.INSTALL CHARCOAL CANISTER ASSEMBLY

A309517

a.

Install the charcoal canister assembly with the 3 bolts.

Torque:
29 N*m (296 kgf*cm, 21 ft.*lbf)


b.

Connect the canister pump module connector to the canister pump module.


c.

Connect the charcoal canister outlet hose to the No. 3 fuel tank to canister tube, and slide the clamp to secure the hose.


Hide 77754 9.CONNECT NO. 1 CHARCOAL CANISTER OUTLET HOSE

a.

Connect the No. 1 charcoal canister outlet hose to the fuel tank filler pipe sub-assembly.


Hide 77404 10.CONNECT FUEL TANK VENT HOSE SUB-ASSEMBLY

A184909

a.

Connect the fuel tank vent hose sub-assembly.

NOTICE:
·

Before installing the fuel tank vent hose sub-assembly, make sure that it is not damaged. Make sure that there is no foreign matter present on the connecting surfaces.

·

After connecting, check if the fuel tank vent hose sub-assembly and the connector are securely connected by pulling on them.




b.

Install the bolt.

Torque:
29 N*m (296 kgf*cm, 21 ft.*lbf)