Home › Engine / Hybrid System › 3UR-FE INTAKE / EXHAUST › INTAKE MANIFOLD
RM27L0U _51 Engine / Hybrid System _049301 3UR-FE INTAKE / EXHAUST _0235602 INTAKE MANIFOLD A

3UR-FE INTAKE / EXHAUST  INTAKE MANIFOLD  REMOVAL  


PROCEDURE

Hide 11209 2.REMOVE V-BANK COVER SUB-ASSEMBLY

a.
A380118E01
0.604,1.531 0.427,1.469 0.427,1.469 0.427,1.052 false 0.427,1.052 0.531,1.052 false 0.896,1.719 1.198,1.719 false 2.281,1.24 2.354,1.531 2.354,1.531 2.479,1.531 false 2.656,0.917 2.563,0.604 2.563,0.604 2.448,0.604 false 0.542,0.958 0.854,1.156 0.313,0.198 10 false *1 1.229,1.625 1.542,1.823 0.313,0.198 10 false *2 2.521,1.448 2.833,1.646 0.313,0.198 10 false *4 2.292,0.521 2.604,0.719 0.313,0.198 10 false *3

Raise the front of the V-bank cover sub-assembly to detach the 2 pins. Then remove the 2 V-bank cover hooks from the No. 1 V-bank cover bracket, and remove the V-bank cover sub-assembly.

Text in Illustration
*1 V-bank Cover Grommet
*2 Pin
*3 No. 1 V-bank Cover Bracket
*4 V-bank Cover Hook


Hide 17880 3.REMOVE AIR CLEANER HOSE ASSEMBLY

a.
A187008

Disconnect the vacuum hose from the air cleaner hose assembly.


b.

Slide the clamp and disconnect the ventilation hose from the air cleaner hose assembly.


c.

Loosen the 2 hose clamps.


d.

Remove the air cleaner hose assembly.


Hide 12263 4.DISCONNECT VENTILATION HOSE ASSEMBLY

a.
U151486

Slide the 2 clamps and disconnect the ventilation hose assembly from the ventilation pipe of the cylinder head cover sub-assembly and cylinder head cover sub-assembly LH.


Hide 12601B 5.REMOVE NO. 1 ENGINE COVER SUB-ASSEMBLY

a.
A162089

Remove the No. 1 engine cover sub-assembly.


Hide 12613 6.REMOVE NO. 3 ENGINE COVER

a.
A162090

Remove the No. 3 engine cover.


Hide 17111 7.REMOVE INTAKE MANIFOLD

a.
A307759

Disconnect the throttle body connector from the throttle body assembly.


b.

Slide the 2 clamps and disconnect the 2 water by-pass hoses from the inlet water housing and front water by-pass joint.


c.
A162103

Slide the clamp and disconnect the ventilation hose from the intake manifold.


d.
A162082

Disconnect the 2 vacuum switching valve connectors.


e.

Slide the clamp and disconnect the purge line hose from the purge VSV.


f.
A165518

Remove the 2 bolts.


g.

Slide the clamp and disconnect the union to connector tube hose from the No. 1 tube.


h.
A165471

Detach the 3 wire harness clamps from the 3 wire harness clamp brackets.


i.
A165472

Remove the bolt and wire harness clamp bracket from the intake manifold.


j.
A165478

Remove the 2 nuts, 8 bolts, intake manifold and 2 gaskets.


Hide 12264 8.REMOVE VENTILATION HOSE ASSEMBLY

a.
A380103

Remove the 2 bolts and ventilation hose assembly from the intake manifold.


Hide 11254 9.REMOVE NO. 1 V-BANK COVER BRACKET

a.
A162104

Remove the 2 bolts and No. 1 V-bank cover bracket.


Hide 11254B 10.REMOVE V-BANK COVER BOLT

a.
A380104

Remove the 2 V-bank cover bolts from the intake manifold.


Hide 22030 11.REMOVE THROTTLE BODY ASSEMBLY

a.
A198574

Remove the 4 bolts, throttle body assembly and gasket.


Hide 17650 12.REMOVE VACUUM SWITCHING VALVE ASSEMBLY (for ACIS)

a.
A164145

Disconnect the 2 vacuum hoses from the vacuum switching valve assembly.


b.

Remove the bolt and vacuum switching valve assembly.


Hide 25860 13.REMOVE PURGE VSV

a.
A168583

Slide the clamp and disconnect the purge line hose from the intake manifold.


b.

Remove the bolt and purge VSV.


Hide 44774 14.REMOVE UNION TO CONNECTOR TUBE HOSE

a.
A187011

Slide the clamp and remove the union to connector tube hose from the intake manifold.


Hide 15.REMOVE WIRE HARNESS CLAMP BRACKET

a.
A187010

Remove the 2 bolts and 2 wire harness clamp brackets.