Home › Engine / Hybrid System › 3UR-FBE LUBRICATION › OIL PRESSURE SWITCH
RM27L0U _51 Engine / Hybrid System _049305 3UR-FBE LUBRICATION _0235623 OIL PRESSURE SWITCH G

3UR-FBE LUBRICATION  OIL PRESSURE SWITCH  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 83520 1.INSPECT OIL PRESSURE SENDER GAUGE ASSEMBLY

a.
A163798E08
1.646,1.073 2.156,1.073 true 1.104,2 1.719,2.188 0.615,0.188 10 false Test LED 0.094,0 2.615,0.365 2.521,0.365 10 false Component without harness connected: (Oil Pressure Sender Gauge) 2.219,0.979 2.333,1.156 0.115,0.177 10 false 1

Disconnect the sender gauge connector.


b.

Apply battery positive (+) voltage to the sender gauge terminal through a test LED.


c.

Check that the LED does not illuminate when the engine is stopped.


d.

Check that the LED flashes when the engine is running. The number of flashes varies with engine speed.

If the operation is not as specified, replace the oil pressure sender gauge assembly.