Home › Drivetrain › AB60E AUTOMATIC TRANSMISSION / TRANSAXLE › SPEED SENSOR
RM27L0U _52 Drivetrain _049311 AB60E AUTOMATIC TRANSMISSION / TRANSAXLE _0235659 SPEED SENSOR G

AB60E AUTOMATIC TRANSMISSION / TRANSAXLE  SPEED SENSOR  INSPECTION  


PROCEDURE

Hide 89413B 1.INSPECT SPEED SENSOR NT

a.
C352933E01
1.104,2.729 1.427,2.021 true 2.323,2.729 1.948,2.031 true 0.219,0.188 2.719,0.552 2.5,0.365 10 false Component without harness connected: (Speed Sensor NT) 1,2.719 1.156,2.917 0.156,0.198 10 false 2 2.354,2.719 2.51,2.917 0.156,0.198 10 false 1

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 560 to 680 Ω


If the result is not as specified, replace the sensor.


Hide 89413B 2.INSPECT SPEED SENSOR SP2

a.
C352933E02
1.073,2.813 1.427,2.021 true 2.344,2.813 1.958,2.021 true 0.333,0.219 2.729,0.594 2.396,0.375 10 false Component without harness connected: (Speed Sensor SP2) 0.958,2.75 1.115,2.948 0.156,0.198 10 false 2 2.375,2.781 2.531,2.979 0.156,0.198 10 false 1

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 560 to 680 Ω


If the result is not as specified, replace the sensor.