Home › Drivetrain › AB60E AUTOMATIC TRANSMISSION / TRANSAXLE › SHIFT LEVER
RM27L0U _52 Drivetrain _049311 AB60E AUTOMATIC TRANSMISSION / TRANSAXLE _0235669 SHIFT LEVER A

AB60E AUTOMATIC TRANSMISSION / TRANSAXLE  SHIFT LEVER  INSTALLATION  


PROCEDURE

Hide 1.INSTALL TRANSMISSION FLOOR SHIFT ASSEMBLY

a.
U153582E02
2.854,1.552 2.969,1.708 0.115,0.156 10 false 3 1.344,2.729 1.458,2.885 0.115,0.156 10 false 4 2.042,2.698 2.156,2.854 0.115,0.156 10 false 2 0.229,0.344 0.344,0.5 0.115,0.156 10 false 1

Install the transmission floor shift with the 4 bolts. Tighten the bolts in the order shown in the illustration.

Torque:
14 N*m (143 kgf*cm, 10 ft.*lbf)


b.

Connect the clamp and 2 connectors.


Hide 33820B 2.CONNECT TRANSMISSION CONTROL CABLE ASSEMBLY

a.
C179207

Install the cable outer of the transmission control cable to the shift lever retainer, and install a new clip.


b.
U153581E02
1.01,0.146 1.479,0.708 true 0.229,0.052 1,0.302 0.771,0.25 10 true Ridged Side

Connect the transmission control cable end to the shift lever.

NOTICE:

Make sure to install the cable end so that the inner cable is not twisted. Confirm that the cable end's ridged side is facing upward.



Hide 3.INSTALL FRONT CONSOLE BOX ASSEMBLY

a.

Install the front console box assembly (See page Vehicle Interior>INTERIOR PANELS / TRIM>FRONT CONSOLE BOX>INSTALLATION).