Home › Drivetrain › AB60E AUTOMATIC TRANSMISSION / TRANSAXLE › SHIFT LEVER
RM27L0U _52 Drivetrain _049311 AB60E AUTOMATIC TRANSMISSION / TRANSAXLE _0235669 SHIFT LEVER A

AB60E AUTOMATIC TRANSMISSION / TRANSAXLE  SHIFT LEVER  DISASSEMBLY  


PROCEDURE

Hide 35906 1.REMOVE INDICATOR LIGHT WIRE SUB-ASSEMBLY

a.
U153439E02
1.521,1.281 1.156,1 true 1.521,1.563 1.156,1.844 true 2.563,3.156 2.521,2.594 2.521,2.594 2.375,2.594 false 0.24,0.073 2.719,0.458 2.479,0.385 10 false Component without harness connected: (Transmission Control Switch) 0.844,0.885 1.177,1.073 0.333,0.188 10 false ILL+ 0.844,1.802 1.156,1.99 0.313,0.188 10 false ILL- 0.635,2.51 2.49,2.698 1.854,0.188 10 false Connector Housing Retainer

Using a thin-bladed screwdriver, release the connector housing retainer.


b.

Using a thin-bladed screwdriver, pull out the 4 (ILL+) and 8 (ILL-) terminals from the rear as shown in the illustration.


c.
C179209

Rotate the indicator light wire counterclockwise to align the key part and remove the wire.


Hide 35970F 2.REMOVE POSITION INDICATOR HOUSING ASSEMBLY

a.
C179211

Disengage the 4 claws and remove the position indicator housing.


Hide 35975 3.REMOVE POSITION INDICATOR SLIDE COVER

a.
C179212

Remove the position indicator slide cover with No. 2 position indicator slide cover.


Hide 35976 4.REMOVE NO. 2 POSITION INDICATOR SLIDE COVER

a.
C179213

Remove the No. 2 position indicator slide cover from the position indicator slide cover.


Hide 33563 5.REMOVE SHIFT LOCK RELEASE BUTTON

a.
C179214

Disengage the 2 claws and remove the shift lock release button and shift lock release spring.


Hide 35974 6.REMOVE LOWER POSITION INDICATOR HOUSING

a.
C179215

Using a small screwdriver, disengage the 6 claws and remove the lower position indicator housing.


Hide 85903 7.REMOVE SHIFT LOCK CONTROL ECU

a.
C179217

Disconnect the shift lock solenoid connector.


b.

Disengage the 3 claws and remove the shift lock control ECU.