Home › Drivetrain › JF3A TRANSFER / 4WD / AWD › TRANSFER OIL
RM27L0U _52 Drivetrain _049312 JF3A TRANSFER / 4WD / AWD _0235676 TRANSFER OIL A

JF3A TRANSFER / 4WD / AWD  TRANSFER OIL  REPLACEMENT  


PROCEDURE

Hide 1.DRAIN TRANSFER OIL

a.
C159809

Remove the 4 bolts and lower transfer case protector.


b.

Remove the filler plug and gasket.


c.

Remove the drain plug and gasket, and drain the transfer oil.


Hide 2.ADD TRANSFER OIL

a.

Install a new gasket and the drain plug.

Torque:
37 N*m (377 kgf*cm, 27 ft.*lbf)


b.

Pour oil so that the oil level is between 0 to 5.0 mm (0 to 0.197 in.) from the bottom lip of the filler plug hole.

NOTICE:
·

Pour oil slowly.

·

Pour oil a little at a time, waiting several minutes between each addition of oil.




c.

Wait approximately 5 minutes and check that the oil level has not changed.


d.

Install a new gasket and the filler plug.

Torque:
37 N*m (377 kgf*cm, 27 ft.*lbf)


e.
C159809

Install the lower transfer case protector with the 4 bolts.

Torque:
18 N*m (184 kgf*cm, 13 ft.*lbf)