Home › Drivetrain › DRIVE SHAFT / PROPELLER SHAFT › FRONT PROPELLER SHAFT ASSEMBLY
RM27L0U _52 Drivetrain _049313 DRIVE SHAFT / PROPELLER SHAFT _0235684 FRONT PROPELLER SHAFT ASSEMBLY A

DRIVE SHAFT / PROPELLER SHAFT  FRONT PROPELLER SHAFT ASSEMBLY  INSTALLATION  


PROCEDURE

Hide 37140 1.INSTALL FRONT PROPELLER SHAFT

a.
C179230E04
2.125,1.115 2.417,1.688 2.417,1.688 2.042,1.188 false 1.323,4.094 1.531,4.365 1.531,4.365 1.229,4.167 false 2.438,1.646 3.229,1.958 0.792,0.313 10 false Matchmarks 1.542,4.292 2.323,4.604 0.781,0.313 10 false Matchmarks

Align the matchmarks on the differential and propeller shaft flange.


b.

Align the matchmarks on the transfer and propeller shaft flange.


c.

Install the front propeller shaft assembly with the 8 nuts and 8 washers.

Torque:
80 N*m (816 kgf*cm, 59 ft.*lbf)


Hide 37117 2.INSTALL PROPELLER SHAFT HEAT INSULATOR

C158452

a.

Install the heat insulator to the heat insulator bracket with the 2 bolts.

Torque:
16 N*m (163 kgf*cm, 12 ft.*lbf)