37110
1.INSPECT PROPELLER SHAFT ASSEMBLY
Using a dial indicator, check the propeller shaft runout.
1.02 mm (0.0402 in.)
If the shaft runout is greater than the maximum, replace the shaft.
04371H
2.INSPECT UNIVERSAL J0INT SPIDER BEARING
Mount the propeller shaft in a vise.
Inspect the spider bearing for wear or damage.
Using a dial indicator, measure the spider bearing axial play by turning the yoke of the flange while holding the shaft tightly.
0.05 mm (0.00197 in.)
If the spider bearing axial play exceeds the maximum, replace the spider bearing.