Home › Drivetrain › DRIVE SHAFT / PROPELLER SHAFT › PROPELLER SHAFT ASSEMBLY(for 4WD)
RM27L0U _52 Drivetrain _049313 DRIVE SHAFT / PROPELLER SHAFT _0235686 PROPELLER SHAFT ASSEMBLY(for 4WD) A

DRIVE SHAFT / PROPELLER SHAFT  PROPELLER SHAFT ASSEMBLY(for 4WD)  INSTALLATION  


PROCEDURE

Hide 37110 1.INSTALL PROPELLER SHAFT ASSEMBLY

a.
U153592E02
1.406,3.438 0.875,3.469 0.875,3.469 1.375,3.49 false 1.885,1.271 2.354,1.51 2.354,1.51 1.958,1.417 false 2.375,1.438 3.24,1.698 0.865,0.26 10 true Matchmarks 0.104,3.375 0.865,3.656 0.76,0.281 10 true Matchmarks

Align the matchmarks on the propeller shaft flange and differential flange.


b.

Align the matchmarks on the propeller shaft flange and transfer flange.


c.

Install the propeller shaft assembly with the 8 nuts.

Torque:
70 N*m (714 kgf*cm, 52 ft.*lbf)


Hide 36336 2.INSTALL TRANSFER HEAT INSULATOR

a.
C158451

Install the transfer heat insulator with the 3 bolts.

Torque:
15 N*m (153 kgf*cm, 11 ft.*lbf)


Hide 37117B 3.INSTALL PROPELLER SHAFT HEAT INSULATOR

a.
C158450

Install the propeller shaft heat insulator with the 2 bolts.

Torque:
30 N*m (306 kgf*cm, 22 ft.*lbf)