Home › Drivetrain › DRIVE SHAFT / PROPELLER SHAFT › PROPELLER SHAFT ASSEMBLY(for 4WD)
RM27L0U _52 Drivetrain _049313 DRIVE SHAFT / PROPELLER SHAFT _0235686 PROPELLER SHAFT ASSEMBLY(for 4WD) G

DRIVE SHAFT / PROPELLER SHAFT  PROPELLER SHAFT ASSEMBLY(for 4WD)  INSPECTION  


PROCEDURE

Hide 37110 1.INSPECT PROPELLER SHAFT ASSEMBLY

a.
C160098

Using a dial indicator, measure the propeller shaft runout.

Maximum runout:

1.02 mm (0.0402 in.)


If the shaft runout is greater than the maximum, replace the propeller shaft.



Hide 04371H 2.INSPECT UNIVERSAL JOINT SPIDER BEARING

a.
C158513

Inspect the spider bearing for wear or damage.


b.

Using a dial indicator, measure the spider bearing axial play by turning the yoke of the flange while holding the shaft tightly.

Maximum runout:

0.05 mm (0.00197 in.)


If the spider bearing axial play exceeds the maximum, replace the spider bearing.