Home › Drivetrain › AXLE AND DIFFERENTIAL › DIFFERENTIAL MOUNT CUSHION
RM27L0U _52 Drivetrain _049314 AXLE AND DIFFERENTIAL _0235702 DIFFERENTIAL MOUNT CUSHION A

AXLE AND DIFFERENTIAL  DIFFERENTIAL MOUNT CUSHION  INSTALLATION  


PROCEDURE

Hide 41651 1.INSTALL NO. 1 REAR DIFFERENTIAL MOUNT CUSHION

a.

Using SST, install a new No. 1 rear differential mount cushion.

C353518E01
5.802,0.51 5.594,0.333 false 5.99,2.146 5.854,1.896 5.854,1.896 6.135,2.229 false 5.125,0.229 5.615,0.417 0.49,0.188 10 false 3°to -3° 5.573,1.802 6.063,1.99 0.49,0.188 10 false SST 5.542,3.083 6.031,3.271 0.49,0.188 10 false Front

SST
09570-60010  

NOTICE:
·

Temporarily install the mount cushion to the member in order to prevent it from tilting and install the SST.

·

Be sure to use the correct combination of SST.

·

Make sure that the SST contacts the entire circumference of the mount cushion.




Hide 51933C 2.INSTALL SPARE WHEEL STOPPER

a.
C180989

Install the spare wheel stopper with the 4 bolts.

Torque:
20 N*m (204 kgf*cm, 15 ft.*lbf)


Hide 41110 3.INSTALL REAR DIFFERENTIAL CARRIER ASSEMBLY