48540
1.REMOVE REAR SHOCK ABSORBER ASSEMBLY LH
48790
2.LOOSEN REAR UPPER CONTROL ARM ASSEMBLY LH
Loosen the 3 bolts and 3 nuts.
Do not remove the bolts and nuts.
48231B
3.REMOVE REAR COIL SPRING LH
Insert a piece of wood between the jack and the No. 2 lower arm, and raise the No. 2 lower arm.
Raise the lower arm to the point just before the vehicle is raised.
Using SST, compress the coil spring.
Gently lower the jack and remove the coil spring and insulator.