Home › Suspension › TIRE PRESSURE MONITORING › TIRE PRESSURE WARNING RESET SWITCH
RM27L0U _53 Suspension _049319 TIRE PRESSURE MONITORING _0235733 TIRE PRESSURE WARNING RESET SWITCH G

TIRE PRESSURE MONITORING  TIRE PRESSURE WARNING RESET SWITCH  INSPECTION  


PROCEDURE

Hide 84746A 1.INSPECT TIRE PRESSURE WARNING RESET SWITCH

a.
C162893E05
2.771,2.135 2.698,2.552 true 3.031,2.125 3.104,2.542 true 1.385,2.469 1.625,2.802 0.24,0.333 10 false ON 1.771,2.615 2.083,2.948 0.313,0.333 10 false OFF 2.646,2.583 2.771,2.917 0.125,0.333 10 false 2 3.094,2.573 3.219,2.906 0.125,0.333 10 false 1 0.125,0.083 2.604,0.458 2.479,0.375 10 false Component without harness connected: (Tire Pressure Warning Reset Switch)

Measure the resistance between terminals 1 and 2 of the tire pressure warning reset switch when the tire pressure warning switch is ON and OFF.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
1 - 2 ON Below 1 Ω
OFF 10 kΩ or higher


If the result is not as specified, replace the tire pressure warning reset switch.