Home › Brake › BRAKE (FRONT) › FRONT BRAKE FLEXIBLE HOSE
RM27L0U _54 Brake _049323 BRAKE (FRONT) _0235750 FRONT BRAKE FLEXIBLE HOSE A

BRAKE (FRONT)  FRONT BRAKE FLEXIBLE HOSE  INSTALLATION  


PROCEDURE

Hide 47313A 1.INSTALL FRONT FLEXIBLE HOSE

a.
C242482E01
1.781,0.594 1.906,0.74 0.125,0.146 10 true A 0.594,2.313 0.719,2.458 0.125,0.146 10 false A

Attach 2 new clips (labeled A) to the flexible hose.


b.

Using a union nut wrench, connect the flexible hose to the brake tube and wheel cylinder tube while holding the flexible hose with a wrench.

Torque:
15 N*m (155 kgf*cm, 11 ft.*lbf)

NOTICE:

Use the formula to calculate special torque values for situations where a union nut wrench is combined with a torque wrench (See page General>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION).



Hide 42603 3.INSTALL FRONT WHEEL

Torque:
for Aluminum Wheel : 131 N*m (1336 kgf*cm, 97 ft.*lbf)
for Steel Wheel : 209 N*m (2131 kgf*cm, 154 ft.*lbf)