Home › Brake › BRAKE (FRONT) › FRONT BRAKE
RM27L0U _54 Brake _049323 BRAKE (FRONT) _0235751 FRONT BRAKE A

BRAKE (FRONT)  FRONT BRAKE  REMOVAL  


PROCEDURE

Hide 42603 1.REMOVE FRONT WHEEL

Hide 04465 2.REMOVE FRONT DISC BRAKE PAD KIT

a.
C154476

Remove the pin hold clip.

NOTICE:

The pin hold clip can be used again if it has sufficient rebound; no deformation or wear; and has had all rust, dirt and foreign matter cleaned off.



b.

Remove the 2 hole pins.


c.
C155461

Remove the front disc brake anti-rattle spring.

NOTICE:

The anti-rattle spring can be used again if it has sufficient rebound; no deformation, cracks or wear; and has had all rust, dirt and foreign matter cleaned off.



d.
C155460

Remove the 2 pads from the disc brake caliper.


e.

Remove the No. 1 and No. 2 anti-squeal shims from each pad.


Hide 3.DRAIN BRAKE FLUID

NOTICE:

Wash brake fluid off immediately if it is spilled on any painted surface.


Hide 47317 4.DISCONNECT NO. 7 FRONT BRAKE TUBE

a.
C208567

Using a union nut wrench, disconnect the front brake tube from the disc brake caliper.


Hide 5.REMOVE FRONT DISC BRAKE CALIPER ASSEMBLY LH

a.
C154478

Remove the 2 bolts and disc brake caliper from the knuckle.


Hide 43512 6.REMOVE FRONT DISC

a.
C155464E03
1.76,1.177 2.531,0.938 2.531,0.938 1.781,1.104 false 2.594,0.865 3.344,1.146 0.75,0.281 10 true Matchmark

Put matchmarks on the front disc and axle hub if planning to reuse the disc.


b.

Remove the front disc.