Home › Brake › BRAKE (REAR) › REAR BRAKE
RM27L0U _54 Brake _049324 BRAKE (REAR) _0235752 REAR BRAKE A

BRAKE (REAR)  REAR BRAKE  DISASSEMBLY  


PROCEDURE

Hide 31478C 1.REMOVE REAR DISC BRAKE BLEEDER PLUG CAP

Hide 47547C 2.REMOVE REAR DISC BRAKE BLEEDER PLUG

Hide 3.REMOVE CYLINDER BOOT

a.
C201388

Using a screwdriver, remove the cylinder boot from the cylinder.

HINT:

Tape the screwdriver tip before use.



Hide 47731B 4.REMOVE REAR DISC BRAKE PISTON

a.
C155442

Place a piece of cloth or a similar object between the piston and cylinder.


b.

Use compressed air to remove the piston from the cylinder.

CAUTION:

Do not place your fingers in front of the piston when using compressed air.



Hide 5.REMOVE PISTON SEAL

a.
C201389

Using a screwdriver, remove the piston seal from the cylinder.

HINT:

Tape the screwdriver tip before use.


NOTICE:

Do not damage the inner cylinder or cylinder groove.