Home › Brake › BRAKE (REAR) › REAR BRAKE
RM27L0U _54 Brake _049324 BRAKE (REAR) _0235752 REAR BRAKE A

BRAKE (REAR)  REAR BRAKE  REASSEMBLY  


PROCEDURE

Hide 1.INSTALL PISTON SEAL

a.
C191837E01
0.728,2.876 2.746,3.053 2.018,0.177 10 Lithium soap base glycol grease

Apply a light coat of lithium soap base glycol grease to the entire inner and outer circumference of a new piston seal.


b.

Install the piston seal to the disc brake cylinder.


Hide 2.INSTALL CYLINDER BOOT

a.
C191838E01
0.731,2.868 2.778,3.058 2.046,0.190 10 Lithium soap base glycol grease

Apply a light coat of lithium soap base glycol grease to the entire inner and outer circumference of a new cylinder boot.


b.

Apply a light coat of lithium soap base glycol grease to the entire outer circumference of the rear disc brake piston where it contacts the rear disc brake cylinder.


c.

Install the cylinder boot to the rear disc brake piston.


d.

Install the rear disc brake piston to the rear disc brake cylinder assembly.


Hide 47731B 3.INSTALL REAR DISC BRAKE PISTON

a.

Install the cylinder boot to the disc brake cylinder.

NOTICE:

Install the boot securely into the groove of the disc brake cylinder.



b.
C155471

Push in the piston by hand and install the cylinder boot into the groove of the piston.

NOTICE:

Install the boot securely into the grooves of the piston.



Hide 47547C 4.TEMPORARILY INSTALL REAR DISC BRAKE BLEEDER PLUG

a.

Temporarily install the bleeder plug to the disc brake cylinder.

HINT:

The bleeder plug will be tightened to the torque specification in the "BLEED AIR FROM BRAKE LINE" procedure.



Hide 31478C 5.INSTALL REAR DISC BRAKE BLEEDER PLUG CAP