Home › Audio / Visual / Telematics › AUDIO / VIDEO › LUGGAGE SPEAKER
RM27L0U _56 Audio / Visual / Telematics _049329 AUDIO / VIDEO _0235771 LUGGAGE SPEAKER G

AUDIO / VIDEO  LUGGAGE SPEAKER  INSPECTION  


PROCEDURE

Hide 86160U 1.INSPECT QUARTER SIDE SPEAKER ASSEMBLY (for 8 or 12 Speakers)

a.

When there is a malfunction such as noise from a speaker or no sound at all, replace the speaker with a new one and check that the malfunction disappears.

OK:

Malfunction disappears.


HINT:
·

Connect the connectors to the quarter side speakers.

·

When there is a possibility that either the right or left quarter side speaker assembly is defective, inspect by interchanging the right one with the left one.

·

Perform the inspection above on both the LH and RH sides.




Hide 86160U 2.INSPECT QUARTER SIDE SPEAKER ASSEMBLY (for 14 Speakers)

E283584E01
0.126,0 0.491,0.282 0.364,0.282 10 *a

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 Always 1.5 to 2.5 Ω


If the result is not as specified, replace the quarter side speaker assembly.

Text in Illustration
*a Component without harness connected
(Quarter Side Speaker Assembly)


Hide 86150 3.INSPECT W/BOX NO. 1 SPEAKER ASSEMBLY (for 14 Speakers)

E160619E05
0.335,0.327 0.910,0.620 0.575,0.293 10 *a

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 Always 1.6 to 2.4 Ω
3 - 4 Always 1.6 to 2.4 Ω


If the result is not as specified, replace the w/box No. 1 speaker assembly.

Text in Illustration
*a Component without harness connected
(w/box No. 1 Speaker Assembly)