Home › Audio / Visual / Telematics › AUDIO / VIDEO › FRONT DOOR SPEAKER
RM27L0U _56 Audio / Visual / Telematics _049329 AUDIO / VIDEO _0235772 FRONT DOOR SPEAKER G

AUDIO / VIDEO  FRONT DOOR SPEAKER  INSPECTION  


PROCEDURE

Hide 86160 1.INSPECT FRONT NO. 1 SPEAKER ASSEMBLY (for 8 or 12 Speakers)

E144966E56
0.095,0 0.431,0.253 0.336,0.253 10 *a

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 Always 3.2 to 4.8 Ω


If the result is not as specified, replace the front No. 1 speaker assembly.

Text in Illustration
*a Component without harness connected
(Front No. 1 speaker Assembly)


Hide 86160 2.INSPECT FRONT NO. 1 SPEAKER ASSEMBLY (for 14 Speakers)

E144966E56
0.095,0 0.431,0.253 0.336,0.253 10 *a

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 Always 1.8 to 2.6 Ω


If the result is not as specified, replace the front No. 1 speaker assembly.

Text in Illustration
*a Component without harness connected
(Front No. 1 speaker Assembly)


Hide 86160J 3.INSPECT FRONT NO. 3 SPEAKER ASSEMBLY (for 12 or 14 speakers)

a.

When there is a malfunction such as noise from a speaker or no sound at all, replace the speaker with a new one and check that the malfunction disappears.

OK:

Malfunction disappears.


HINT:
·

Connect the connectors to the front No. 3 speakers.

·

When there is a possibility that either the right or left front No. 3 speaker assembly is defective, inspect by interchanging the right one with the left one.

·

Perform the inspection above on both the LH and RH sides.