Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM
RM27L0U _56 Audio / Visual / Telematics _049330 NAVIGATION / MULTI INFO DISPLAY _0235785 NAVIGATION SYSTEM C

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM  B1579  Voice Recognition Microphone Disconnected  


DESCRIPTION

The navigation receiver assembly and roof console box assembly (telephone microphone assembly) are connected to each other using the microphone connection detection signal lines.

This DTC is stored when a microphone connection detection signal line is disconnected.

DTC Code DTC Detection Condition Trouble Area
B1579 Telephone microphone signal is lost.
·

Navigation receiver assembly

·

Roof console box assembly

·

Telephone microphone assembly

·

Harness or connector



WIRING DIAGRAM

E283430E02
0.469,2.656 2.281,2.854 1.813,0.198 10 false Roof Console Box Assembly 0.781,0.594 1.583,1.948 0.802,1.354 10 false Telephone Microphone Assembly 1.865,0.865 2.229,1.021 0.365,0.156 10 false MIC+ 1.885,1.25 2.229,1.406 0.344,0.156 10 false MIC- 1.917,0.438 2.365,0.594 0.448,0.156 10 false ACC 4.323,1.865 4.938,2.021 0.615,0.156 10 false Shielded 3.156,1.854 3.771,2.01 0.615,0.156 10 false Shielded 2.313,2 2.563,2.156 0.25,0.156 10 false 14 2.313,0.823 2.521,0.979 0.208,0.156 10 false 9 2.313,1.208 2.521,1.365 0.208,0.156 10 false 8 2.313,0.406 2.563,0.563 0.25,0.156 10 false 10 5.469,2 5.594,2.156 0.125,0.156 10 false 6 5.396,1.604 5.594,1.76 0.198,0.156 10 false 18 5.469,0.823 5.583,0.979 0.115,0.156 10 false 5 5.396,1.208 5.583,1.365 0.188,0.156 10 false 19 5.469,0.406 5.594,0.563 0.125,0.156 10 false 4 5.469,2.625 6.75,2.979 1.281,0.354 10 false Navigation Receiver Assembly 0.469,2.5 0.948,2.708 0.479,0.208 10 false U7 5.469,2.479 5.896,2.656 0.427,0.177 10 false I53 5.708,0.917 6.146,1.073 0.438,0.156 10 false MIN+ 5.708,1.292 6.146,1.448 0.438,0.156 10 false MIN- 5.708,1.688 6.198,1.844 0.49,0.156 10 false SGND 5.708,0.49 6.146,0.646 0.438,0.156 10 false MACC 1.813,2.052 2.281,2.208 0.469,0.156 10 false SGND 5.708,2.094 6.146,2.25 0.438,0.156 10 false SNS2

PROCEDURE

1.CHECK NAVIGATION RECEIVER ASSEMBLY
a.
U154171E02
2.052,1.302 2.167,1.896 2.167,1.896 2.396,1.896 true 2.177,1.302 2.406,1.667 2.406,1.667 2.635,1.667 true 2.188,1.083 2.438,0.396 2.438,0.396 2.708,0.396 true 2.417,1.802 2.781,1.979 0.365,0.177 10 false MIN- 2.667,1.604 3.115,1.781 0.448,0.177 10 false SGND 2.74,0.313 3.188,0.49 0.448,0.177 10 false MACC 0.063,0.042 0.302,0.219 0.24,0.177 10 false *a 0.292,1.021 0.604,1.198 0.313,0.177 10 false I53

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
I53-18 (SGND) - Body ground Always Below 1 Ω
I53-19 (MIN-) - Body ground Always Below 1 Ω



b.

Measure the voltage according to the value(s) in the table below.

Standard Voltage:
Tester Connection Switch Condition Specified Condition
I53-4 (MACC) - Body ground Ignition switch ACC 4 to 6 V


Text in Illustration
*a Component with harness connected
(Navigation Receiver Assembly)



OK

2.CHECK HARNESS AND CONNECTOR (NAVIGATION RECEIVER ASSEMBLY - ROOF CONSOLE BOX ASSEMBLY)

NG

2.CHECK HARNESS AND CONNECTOR (NAVIGATION RECEIVER ASSEMBLY - ROOF CONSOLE BOX ASSEMBLY)
a.

Disconnect the I53 navigation receiver assembly connector.


b.

Disconnect the U7 roof console box assembly connector.


c.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
I53-4 (MACC) - U7-10 (ACC) Always Below 1 Ω
I53-5 (MIN+) - U7-9 (MIC+) Always Below 1 Ω
I53-19 (MIN-) - U7-8 (MIC-) Always Below 1 Ω
I53-6 (SNS2) - U7-14 (SGND) Always Below 1 Ω
I53-4 (MACC) - Body ground Always 10 kΩ or higher
I53-5 (MIN+) - Body ground Always 10 kΩ or higher
I53-19 (MIN-) - Body ground Always 10 kΩ or higher
I53-18 (SGND) - Body ground Always 10 kΩ or higher
I53-6 (SNS2) - Body ground Always 10 kΩ or higher




OK

3.CHECK TELEPHONE MICROPHONE ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

3.CHECK TELEPHONE MICROPHONE ASSEMBLY
a.

Replace the telephone microphone assembly with a known good one (See page Audio / Visual / Telematics>AUDIO / VIDEO>MICROPHONE AMPLIFIER>REMOVAL).


b.

Check for DTCs (See page Audio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM>DTC CHECK / CLEAR).

OK:

No DTCs are output.


Result
Result Proceed to
OK A
NG (for Short Type Overhead Console Box) B
NG (for Long Type Overhead Console Box) C



A

END (TELEPHONE MICROPHONE ASSEMBLY IS DEFECTIVE)

B

C