Home › Audio / Visual / Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM
RM27L0U _56 Audio / Visual / Telematics _049330 NAVIGATION / MULTI INFO DISPLAY _0235785 NAVIGATION SYSTEM C

NAVIGATION / MULTI INFO DISPLAY  NAVIGATION SYSTEM  B158C  SD Card Communication Malfunction  


DESCRIPTION

The navigation receiver assembly stores this DTC when the SD card cannot be mounted when inserted into the SD card slot.

DTC Code DTC Detection Condition Trouble Area
B158C The SD card cannot be mounted when inserted into the SD card slot.
·

SD card

·

Navigation receiver assembly



PROCEDURE

1.CHECK SD CARD
a.

Turn the ignition switch off and remove the SD card from the SD card slot.


b.

Check that the SD card is not damaged.

OK:

The SD card is not damaged.




OK

2.CLEAN COMPONENTS

NG

REPLACE SD CARD

2.CLEAN COMPONENTS
a.

Check that the terminals of the SD card are free of foreign matter. Remove foreign matter as necessary.


b.

Check that the SD card slot of the navigation receiver assembly is free of foreign matter. Remove foreign matter as necessary.


c.

Insert the SD card into the SD card slot.



NEXT

3.CHECK FOR DTC
3.CHECK FOR DTC

OK

END (FOREIGN MATTER IS ADHERED TO SD CARD OR SD CARD SLOT)

NG

4.REPLACE SD CARD
4.REPLACE SD CARD
a.

Replace the SD card.



c.

Recheck for DTCs and check that no DTCs are output (See page Audio / Visual / Telematics>NAVIGATION / MULTI INFO DISPLAY>NAVIGATION SYSTEM>DTC CHECK / CLEAR).

OK:

No DTCs are output.




OK

END (SD CARD IS DEFECTIVE)

NG