Home › Vehicle Interior › DOOR LOCK › UNLOCK WARNING SWITCH
RM27L0U _58 Vehicle Interior _049336 DOOR LOCK _0235807 UNLOCK WARNING SWITCH G

DOOR LOCK  UNLOCK WARNING SWITCH  INSPECTION  


PROCEDURE

Hide 84052 1.INSPECT UNLOCK WARNING SWITCH

U153962E02
0.469,0.75 1.01,0.927 0.542,0.177 10 false Pushed 0.365,0.146 1.135,0.323 0.771,0.177 10 false Not Pushed 0.229,2.281 2.667,2.656 2.438,0.375 10 false Component without harness connected: (Unlock Warning Switch)

a.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
1 - 2 Pin released 10 kΩ or higher
Pin pushed in Below 1 Ω


If the result is not as specified, replace the unlock warning switch.