Home › Vehicle Interior › DOOR LOCK › WIRELESS DOOR LOCK CONTROL SYSTEM
RM27L0U _58 Vehicle Interior _049336 DOOR LOCK _0235813 WIRELESS DOOR LOCK CONTROL SYSTEM U

DOOR LOCK  WIRELESS DOOR LOCK CONTROL SYSTEM  TERMINALS OF ECU  


CHECK MAIN BODY ECU (COWL SIDE JUNCTION BLOCK LH)


U153563E03
2.865,1.104 2.781,1.104 2.781,1.104 2.365,1.365 true 5.51,0.719 5.417,0.719 5.417,0.719 5.01,0.969 true 2.875,1.635 2.802,1.635 2.802,1.635 2.396,1.792 true 2.906,2.635 2.823,2.635 2.823,2.635 2.406,2.385 true 2.885,2.25 2.813,2.25 2.813,2.25 2.406,2.146 true 2.208,2.854 2.438,3.021 0.229,0.167 10 false DA 1.958,2.063 2.167,2.229 0.208,0.167 10 false DB 1.958,1.26 2.208,1.427 0.25,0.167 10 false DC 4.927,1.646 5.146,1.813 0.219,0.167 10 false DD 5.563,0.635 5.771,0.802 0.208,0.167 10 false DE 2.948,2.563 3.167,2.729 0.219,0.167 10 false H1 2.938,2.156 3.156,2.323 0.219,0.167 10 false H2 2.917,1.563 3.135,1.729 0.219,0.167 10 false H3 2.906,1.021 3.125,1.188 0.219,0.167 10 false H4 3.094,3.625 3.323,3.802 0.229,0.177 10 false DB 1.552,5.125 1.771,5.271 0.219,0.146 10 false DD 4.385,5.125 4.594,5.271 0.208,0.146 10 false DE 1.073,3.625 1.281,3.771 0.208,0.146 10 false DA 5.646,3.625 5.875,3.771 0.229,0.146 10 false DC 6.01,6.969 6.208,7.125 0.198,0.156 10 false H4 3.542,6.969 3.74,7.135 0.198,0.167 10 false H3 1.073,6.969 1.281,7.115 0.208,0.146 10 false H2 6.104,5.125 6.292,5.302 0.188,0.177 10 false H1

a.

Disconnect the DA, DB, DC, DD, H1, H3 and H4 main body ECU connectors.


b.

Measure the resistance and voltage between each terminal of the wire harness side connectors and body ground.

Terminal No (Symbol.) Wiring Color Terminal Description Condition Specified Condition
DB-13 (BECU) - Body ground GR - Body ground +B power supply Always 11 to 14 V
DA-1 (ALTB) - Body ground B - Body ground +B (power system alternator system) power supply Always 11 to 14 V
H4-24 (DCTY) - Body ground BR - Body ground Driver side door courtesy light switch input Driver side door CLOSED (OFF) → OPEN (ON) 10 kΩ or higher → Below 1 Ω
H3-21 (PCTY) - Body ground BE - Body ground Passenger side courtesy light switch input Passenger side door CLOSED (OFF) → OPEN (ON) 10 kΩ or higher → Below 1 Ω
H3-25 (RRCY) - Body ground L - Body ground Rear courtesy light switch RH input Rear door RH CLOSED (OFF) → OPEN (ON) 10 kΩ or higher → Below 1 Ω
DC-2 (LCTY) - Body ground G - Body ground*1
B - Body ground*2
Rear courtesy light switch LH input Rear door LH CLOSED (OFF) → OPEN (ON) 10 kΩ or higher → Below 1 Ω
H1-5 (KSW) - Body ground LG - Body ground Unlock warning switch input No key in ignition key cylinder (OFF) → Key inserted (ON) 10 kΩ or higher → Below 1 Ω
DD-62 (GND1, 2) - Body ground W-B - Body ground Ground Always Below 1 Ω

HINT:
·

*1: w/ Rear Power Seat

·

*2: w/o Rear Power Seat



If the result is not as specified, there may be a malfunction on the wire harness side.


c.

Reconnect the DA, DB, DC, DD, H1, H3 and H4 main body ECU connectors.


d.

Measure the voltage between each terminal of the wire harness side connectors and body ground.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
H2-4 (HAZ) - Body ground BE - Body ground Turn signal flasher relay signal Any transmitter switch is pressed → not pressed Below 1 V → Pulse generation*1
H1-7 (BZR) - Body ground R - Body ground Wireless door lock buzzer Wireless door lock buzzer OFF → ON Below 1 V → 11 to 14 V

If the result is not as specified, the ECU may have a malfunction.

HINT:

*1: When operating the answer back function.




CHECK BACK DOOR ECU


a.

Disconnect the V2 and V3 back door ECU connectors.


b.

Measure the resistance and voltage between each terminal of the wire harness side connectors and body ground.

U153311E02
2.271,0.427 2.531,0.573 0.26,0.146 10 false V2 3.74,0.427 3.958,0.573 0.219,0.146 10 false V3

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
V2-1 (BDR) - Body ground SB - Body ground +B power source Always 11 to 14 V
V2-7 (BECU) - Body ground GR - Body ground +B power source Always 11 to 14 V
V2-6 (GND) - Body ground W-B - Body ground Power ground Always Below 1 Ω
V3-10 (BDCY) - V3-20 (CTYE) P - R Back door courtesy switch Back door CLOSED → OPEN 10 kΩ or higher → Below 1 Ω

If the result is not as specified, there may be a malfunction on the wire harness side.