Home › Vehicle Interior › DOOR LOCK › POWER DOOR LOCK CONTROL SYSTEM
RM27L0U _58 Vehicle Interior _049336 DOOR LOCK _0235814 POWER DOOR LOCK CONTROL SYSTEM A

DOOR LOCK  POWER DOOR LOCK CONTROL SYSTEM  CUSTOMIZE PARAMETERS  


PROCEDURE

Hide 1.CUSTOMIZE POWER DOOR LOCK CONTROL SYSTEM

a.

Customizing with Techstream

HINT:

The following items can be customized.


NOTICE:
·

When the customer requests a change in a function, first make sure that the function can be customized.

·

Be sure to make a note of the current settings before customizing.

·

When troubleshooting a function, first make sure that the function is set to the default setting.



i.

Connect the Techstream to the DLC3.


ii.

Turn the ignition switch to ON.


iii.

Turn the Techstream on.


iv.

Enter the following menus: Customize Setting / Door Lock.


v.

Select the setting by referring to the table below.

Door Lock
Display Default Content Setting
Unlock Key Twice ON Function that unlocks only driver side door when driver side door key cylinder is turned to UNLOCK once, and unlock all doors when it is turned to UNLOCK twice. For OFF setting, turning it once unlocks all doors. ON/OFF
Auto Lock ON Function that locks all doors when vehicle speed reaches a certain level. ON/OFF
Auto Lock/Shift OFF Function that locks all doors when shift lever is moved other position from P with engine running and all doors closed ON/OFF
Auto Unlock/Shift ON Function that unlocks all doors when shift lever is moved to P from any other position while the ignition switch to ON ON/OFF
All Unlock/Open-Close OFF Function that unlocks all doors when opening driver door within 10 seconds after turning the ignition switch to ON ON/OFF