74320
1.INSPECT VISOR ASSEMBLY LH
Connect the (+) lead from the battery to terminal 2 and the (-) lead to terminal 1.
Check that the vanity light comes on.
| Measurement Condition | Switch Condition | Specified Condition |
|---|---|---|
| Battery positive (+)
→ Terminal 2 Battery negative (-) → Terminal 1 |
A | Vanity light comes on |
| B to A | Vanity light gradually becomes brighter | |
| B | Vanity light turns off |
If the result is not as specified, replace the visor assembly LH.
74310
2.INSPECT VISOR ASSEMBLY RH
Connect the (+) lead from the battery to terminal 2 and the (-) lead to terminal 1.
Check that the vanity light comes on.
| Measurement Condition | Switch Condition | Specified Condition |
|---|---|---|
| Battery positive (+)
→ Terminal 2 Battery negative (-) → Terminal 1 |
A | Vanity light comes on |
| B to A | Vanity light gradually becomes brighter | |
| B | Vanity light turns off |
If the result is not as specified, replace the visor assembly RH.