81240
1.REMOVE NO. 1 ROOM LIGHT ASSEMBLY (w/o Rear Seat Entertainment System)
Using a screwdriver with its tip wrapped in protective tape, disengage the 4 claws and remove the lens.
Using a moulding remover D, disengage the 4 clips.
Disconnect the connector and then remove the No. 1 room light assembly.
81240A
2.REMOVE NO. 1 ROOM LIGHT ASSEMBLY (w/ Rear Seat Entertainment System)
Using a moulding remover D, disengage the 4 clips.
Disconnect the connector and then remove the No. 1 room light assembly.