Home › Vehicle Interior › LIGHTING (INT) › IGNITION KEY CYLINDER LIGHT
RM27L0U _58 Vehicle Interior _049338 LIGHTING (INT) _0235831 IGNITION KEY CYLINDER LIGHT G

LIGHTING (INT)  IGNITION KEY CYLINDER LIGHT  INSPECTION  


PROCEDURE

Hide 89783 1.INSPECT TRANSPONDER KEY AMPLIFIER

E304788E01
0.194,0.304 2.670,1.048 2.475,0.744 10 Component without harness connected: (Transponder Key Amplifier) 0.68,1.392 1.188,1.705 0.508,0.313 10 ILL- 2.494,1.401 3.001,1.714 0.508,0.313 10 ILL+ 2.045,2.653 2.623,1.598 false 1.437,2.67 0.847,1.581 false

a.

Check the light operation.

i.

Connect the positive (+) battery lead to terminal 2 (ILL+) and the negative (-) battery lead to terminal 4 (ILL-), and then check that the light comes on.

OK:

The light comes on.


If the result is not as specified, replace the transponder key amplifier.