Home › Vehicle Interior › LIGHTING (INT) › GLOVE BOX LIGHT
RM27L0U _58 Vehicle Interior _049338 LIGHTING (INT) _0235832 GLOVE BOX LIGHT G

LIGHTING (INT)  GLOVE BOX LIGHT  INSPECTION  


PROCEDURE

Hide 81260 1.INSPECT NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY LH

a.
E177527E01
0.372,0.078 0.528,0.259 0.156,0.181 10 *a 2.413,1.339 2.739,1.521 0.326,0.181 10 GND 0.777,1.365 0.968,1.547 0.191,0.181 10 +B 1.569,1.426 1.021,1.461 false 1.882,1.408 2.361,1.417 false

Apply battery voltage to the connector and check the LED illumination condition.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 2 (+B)
Battery negative (-) → Terminal 1 (GND)
Light illuminates


Text in Illustration
*1 Component without harness connected
(No. 1 Interior Illumination Light Assembly LH)

If the result is not as specified, replace the interior illumination light assembly.