69110A
1.INSPECT BACK DOOR LOCK ASSEMBLY (w/o Power Back Door)
Check the resistance of the back door courtesy switch.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 3 - 4 | Unlocked | Below 1 Ω |
| 3 - 4 | Locked | 10 kΩ or higher |
If the result is not as specified, replace the back door lock.
69110A
2.INSPECT BACK DOOR LOCK ASSEMBLY (w/ Power Back Door)
Check the resistance of the back door courtesy switch.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 3 - 6 | Unlocked | Below 1 Ω |
| 3 - 6 | Locked | 10 kΩ or higher |
If the result is not as specified, replace the back door lock.