Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › AIRBAG SYSTEM
RM27L0U _58 Vehicle Interior _049341 SUPPLEMENTAL RESTRAINT SYSTEMS _0235848 AIRBAG SYSTEM D

SUPPLEMENTAL RESTRAINT SYSTEMS  AIRBAG SYSTEM  CHECK MODE PROCEDURE  


CHECK MODE (Signal Check): DTC CHECK


a.

Connect the Techstream to the DLC3.


b.

Turn the ignition switch to ON.


c.

Select Signal Check, and proceed with checking using the Techstream.

NOTICE:

Select Signal Check from the DTC check screen displayed on the Techstream to clear the output DTCs (both present and past).


HINT:
·

DTCs can be detected more sensitively in check mode than in normal diagnosis mode.

·

Perform check mode inspection when a malfunction in each squib circuit is suspected even after the normal system code is output through normal diagnosis mode inspection.