Home › Vehicle Interior › SEAT › FRONT SEAT ASSEMBLY(for Power Seat)
RM27L0U _58 Vehicle Interior _049342 SEAT _0235862 FRONT SEAT ASSEMBLY(for Power Seat) G

SEAT  FRONT SEAT ASSEMBLY(for Power Seat)  INSPECTION  


PROCEDURE

Hide 1.INSPECT FRONT POWER SEAT MOTOR ASSEMBLY (for Driver Side)

a.
B208871E01
1.348,0.737 1.994,0.883 0.647,0.147 10 Clockwise 0.28,0.308 0.909,0.612 0.628,0.304 10 Counterclockwise 1.097,2.717 1.827,2.864 0.730,0.147 10 Motor Gear 0.517,2.227 0.867,2.8 0.867,2.8 1.085,2.8 false

Check the operation of the front power seat motor assembly (slide motor).

i.

Apply battery voltage to the power seat motor assembly (slide motor).


ii.

Check that the motor gear rotates smoothly as follows.

OK:
Measurement Condition Operational Direction
Battery positive (+) → 1
Battery negative (-) → 2
Motor gear rotates Clockwise
Battery positive (+) → 2
Battery negative (-) → 1
Motor gear rotates Counterclockwise


If the result is not as specified, replace the front power seat motor assembly.



b.
B161051E19
0.187,0 2.785,0.360 2.598,0.360 10 Component without harness connected: (Front Seat Adjuster)

Check operation of the front seat adjuster (front vertical motor).

i.

Check if the front seat adjuster moves smoothly when the battery is connected to the front vertical motor connector terminals.

OK:
Measurement Condition Operational Direction
Battery positive (+) → 1
Battery negative (-) → 2
Up
Battery positive (+) → 2
Battery negative (-) → 1
Down


If the result is not as specified, replace the front seat assembly.



c.
B161051E19
0.187,0 2.785,0.360 2.598,0.360 10 Component without harness connected: (Front Seat Adjuster)

Check operation of the front seat adjuster (rear lifter motor).

i.

Check if the front seat adjuster moves smoothly when the battery is connected to the rear lifter motor connector terminals.

OK:
Measurement Condition Operational Direction
Battery positive (+) → 2
Battery negative (-) → 1
Up
Battery positive (+) → 1
Battery negative (-) → 2
Down


If the result is not as specified, replace the front seat assembly.



d.
B161051E20
0.187,0 2.785,0.360 2.598,0.360 10 Component without harness connected: (Front Seatback Frame)

Check operation of the front seatback frame (reclining motor).

i.

Check if the seatback frame moves smoothly when the battery is connected to the reclining motor connector terminals.

OK:
Measurement Condition Operational Direction
Battery positive (+) → 2
Battery negative (-) → 1
Front
Battery positive (+) → 1
Battery negative (-) → 2
Rear


If the result is not as specified, replace the front seat assembly.



e.
B161051E19
0.187,0 2.785,0.360 2.598,0.360 10 Component without harness connected: (Front Seat Adjuster)

w/ Leg Support Adjustment Switch:

Check operation of the front seat adjuster (leg support adjustment motor).

i.

Check if the front seat adjuster moves smoothly when the battery is connected to the leg support adjustment motor connector terminals.

OK:
Measurement Condition Operational Direction
Battery positive (+) → 1
Battery negative (-) → 2
Open
Battery positive (+) → 2
Battery negative (-) → 1
Close


If the result is not as specified, replace the front seat assembly.



Hide 2.INSPECT FRONT POWER SEAT MOTOR ASSEMBLY (for Front Passenger Side)

a.
B206437E03
3,2.188 2.656,2.635 2.656,2.635 2.531,2.635 false 2.448,0.375 3.073,0.573 0.625,0.198 10 false Clockwise 0.906,0.74 2.031,0.969 1.125,0.229 10 false Counterclockwise 1.75,2.573 2.479,2.729 0.729,0.156 10 false Motor Gear

Check the operation of the front power seat motor assembly (slide motor).

i.

Apply battery voltage to the power seat motor assembly (slide motor).


ii.

Check that the motor gear rotates smoothly as follows.

OK:
Measurement Condition Operational Direction
Battery positive (+) → 1
Battery negative (-) → 2
Motor gear rotates Clockwise
Battery positive (+) → 2
Battery negative (-) → 1
Motor gear rotates Counterclockwise


If the result is not as specified, replace the front power seat motor assembly.



b.
B161051E20
0.187,0 2.785,0.360 2.598,0.360 10 Component without harness connected: (Front Seatback Frame)

Check operation of the front seatback frame (reclining motor).

i.

Check if the front seatback frame moves smoothly when the battery is connected to the reclining motor connector terminals.

OK:
Measurement Condition Operational Direction
Battery positive (+) → 2
Battery negative (-) → 1
Front
Battery positive (+) → 1
Battery negative (-) → 2
Rear


If the result is not as specified, replace the front seat assembly.