Wear protective gloves. Sharp areas on the parts may injure your hands.
73590
1.REMOVE REAR NO. 2 SEAT INNER BELT ASSEMBLY LH
71692B
2.REMOVE REAR SEAT LOCK COVER OUTER LH
Remove the screw.
Detach the 2 claws and remove the rear seat lock cover outer LH.
71691C
3.REMOVE REAR SEAT LOCK COVER INNER RH
Remove the screw.
Detach the 3 claws and remove the rear seat lock cover inner RH.
4.REMOVE REAR NO. 2 SEAT CUSHION ASSEMBLY LH
Remove the 2 bolts.
Using a T45 "TORX" socket wrench, remove the 2 "TORX" bolts and 2 bushes. Then remove the rear No. 2 seat cushion assembly LH.
79370A
5.REMOVE NO. 3 SEAT CUSHION SPRING ASSEMBLY LH
Remove the hog rings.
Detach the hooks and remove the No. 3 seat cushion spring assembly LH.
79022
6.REMOVE NO. 2 SEAT CUSHION COVER SUB-ASSEMBLY LH
Remove the hog rings and No. 2 seat cushion cover sub-assembly LH from the No. 2 seat cushion pad.
72998B
7.REMOVE REAR SEAT CUSHION COVER LH
Remove the screw.
Detach the claw and remove the rear seat cushion cover LH.
72995D
8.REMOVE REAR SEAT CUSHION COVER INNER RH
Remove the screw.
Detach the claw and remove the rear seat cushion cover inner RH.
71940E
9.REMOVE REAR CENTER SEAT HEADREST ASSEMBLY
Remove the rear center seat headrest assembly.
71970
10.REMOVE REAR SEAT HEADREST ASSEMBLY
Using a screwdriver, push in the headrest lock button to release the headrest lock.
Tape the screwdriver tip before use.
Pull up and remove the rear seat headrest assembly.
When removing the rear seat headrest assembly while it is in the vehicle, fold down the headrest before removing it so that it does not contact the roof.
72909
11.REMOVE REAR NO. 2 SEAT HANDLE
Remove the 2 screws.
Disconnect the rear No. 1 seat lock cable assembly and remove the rear No. 2 seat handle.
72067
12.REMOVE REAR BACK LOCK CONTROL LEVER SUB-ASSEMBLY RH
Remove the screw.
Disconnect the rear No. 1 seat lock cable assembly and remove the rear back lock control lever sub-assembly RH.
72996D
13.REMOVE REAR NO. 2 SEATBACK COVER LH
Detach the 3 claws and remove the rear No. 2 seatback cover LH.
71702C
14.REMOVE REAR SEATBACK BOARD SUB-ASSEMBLY LH
Detach the 12 clips and remove the rear seatback board sub-assembly LH.
71931C
15.REMOVE REAR NO. 2 SEAT HEADREST SUPPORT ASSEMBLY
Detach the 8 claws and remove the 4 rear No. 2 seat headrest supports.
16.REMOVE SEATBACK COVER WITH PAD
Detach the hooks.
Detach the hooks.
Remove the clip and rear seat belt hook.
Remove the hog ring and seatback cover with pad.
79024
17.REMOVE NO. 2 SEATBACK COVER SUB-ASSEMBLY LH
Remove the hog rings and No. 2 seatback cover sub-assembly LH from the No. 2 seatback pad.
71879E
18.REMOVE REAR SEAT RECLINING COVER INNER LH
Remove the screw.
Detach the claw and remove the rear seat reclining cover inner LH.
71878E
19.REMOVE REAR SEAT RECLINING COVER INNER RH
Remove the screw.
Detach the claw and remove the rear seat reclining cover inner RH.
72620E
20.REMOVE REAR NO. 1 SEAT LOCK CABLE ASSEMBLY
Detach the 3 cable ties.
Disconnect the 2 clamps.
Rotate the cable ends.
Pull the cable through the No. 3 seatback frame sub-assembly and remove the rear No. 1 seat lock cable assembly.
79304A
21.REMOVE NO. 3 SEATBACK FRAME SUB-ASSEMBLY LH
Remove the 5 bolts and No. 3 seatback frame sub-assembly LH.
71607
22.REMOVE REAR NO. 2 SEAT ROD SUB-ASSEMBLY
Remove the 2 bolts and rear No. 2 seat rod sub-assembly.